Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

When a vehicle's battery runs out of charge, it is possible to recharge it using another battery, but sometimes it is necessary to proceed with its replacement; this is the case of our video example where the battery has stopped working and needs to be replaced with a new one. To replace the battery of a Fiat 500 X car, it is necessary to open the front hood and remove the red cover of the battery.

Then, we must disconnect the negative pole clamp and the positive pole clamp.

Remove the old battery and insert the new one. Connect the positive pole clamp and then the negative pole clamp, install the cover and close the front hood.


Posted on 12 May 2025 by ScegliAuto


Related tutorials

How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…
How to Replace the Key Battery of the Fiat 500X
How to Replace the Key Battery of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) This brief video tutorial explains how to replace the battery of the key for the 2016 Fiat 500X. The 500X features a keyless remote that you can simp…
How to Replace the Key Battery of the Fiat 500X
How to Replace the Key Battery of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Follow these steps to correctly replace the battery inside your Fiat 500X key. First, you need a new CR2032 battery and a small flathead screwdriver.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos