Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a 2016 Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Service warning light

In this article, we will see how to reset the service light of a 2016 Fiat 500. We recommend performing this procedure only after having the car serviced. First, turn on the ignition, then turn it off and on again, press the accelerator pedal 3 times and hold it down on the third press for about 10 seconds. Turn off the ignition, release the pedal, and start the ignition again. Now the procedure will be complete, and the service light will be reset. As we have seen, the procedure takes less than 1 minute to complete.

Posted on 23 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Reset the Service Light on a Fiat 500
How to Manually Reset the Service Light on a Fiat 500
Fiat 500 (2007-2022 / 312) To manually reset the orange service light that appears on the instrument cluster of your new Fiat 500, follow these steps. First, enter the vehicle,…
How to reset the TPMS light on the Fiat 500 X
How to reset the TPMS light on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Today we will explain the steps to follow to reset the TPMS light after changing the tires on a Fiat 500 X. The steps to follow are simple and quick …
How to Reset the Service Light on a Fiat 500
How to Reset the Service Light on a Fiat 500
Fiat 500 (2007-2024 / 312) To reset the service light on a Fiat 500, get into the car and close all the doors. Insert the key into the ignition and turn it to the MAR position …

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos