|
Do it yourself
| |||
| ||||
How to reset the "Service" light on a Fiat Doblò?
Model: Fiat Doblo
263, Doblo 2, MK 2
- Years 2009-2021
To reset the "Service" light on a Fiat Doblò, the first step is to connect a diagnostic tool to the OBD port, which is usually located under the dashboard, near the steering wheel. Once the tool is connected, turn on the instrument panel without starting the engine. The diagnostic system will automatically recognize the car and display a list of options related to the various vehicle systems. At this point, navigate through the tool's menu to find the section dedicated to maintenance or resetting service intervals. Select the appropriate option to reset the maintenance interval and confirm the operation. The diagnostic tool will send the command to the car's ECU, allowing you to clear the "Service" light indication. Once the reset is complete, disconnect the tool and turn off the instrument panel. To verify that the operation was successful, turn on the instrument panel and check that the "Service" light no longer appears. If the light comes back on, it may be necessary to repeat the procedure following the instructions provided by the diagnostic tool.
Posted on 23 May 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Doblo
(2022-2026 /
Doblo -3)
To correctly and safely complete the manual reset procedure of the service light on your Fiat Doblo third series (year 2023) you only need a few seco…
Fiat Doblo
(2022-2026 /
Doblo -3)
You can reset the Service light that is shown on the Fiat Doblò by holding down the button located on the bottom left side of the steering column: yo…
Fiat Doblo
(2009-2021 /
263, Doblo 2, MK 2)
The following video tutorial shows us the steps to reset the service light of the Fiat Doblo. Before resetting the light, we perform a car service wh…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.201
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
