Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the speakers of the Fiat 500 L

Model: Fiat 500 500 L - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Speaker

See other generations:
Video tutorial

Replacing the speakers located inside the front door panels on the right and left side is a simple and quick operation to perform independently, especially if it is a Fiat 500 L. To perform this operation, we need to remove the door panel. To remove the door panel, we need to unscrew the side and bottom screws using a Torx key. After that, we renew the window switch panel and unscrew the screws inside its housing, once the panel is removed we can unscrew the screws that secure the speaker.

We then remove the speaker and insert the new one, connecting it first to the connector. We mount the door panel and test the functioning of the speakers by turning on the radio.


Posted on 7 June 2025 by ScegliAuto


Related tutorials

How to Replace the Speakers on a Fiat 500?
How to Replace the Speakers on a Fiat 500?
Fiat 500 (2007-2022 / ) To replace the speakers on a Fiat 500, loosen the screws that secure the panel to the corresponding door. These screws are located under the trim of …
How to Replace the Rear Speakers in a Fiat 500 Abarth
How to Replace the Rear Speakers in a Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) To replace the rear speakers in the Fiat 500 Abarth, first access the rear of the cabin. The speakers are integrated into the side panels. Start by r…
How to replace the speakers on a Fiat 500?
How to replace the speakers on a Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the speakers on a Fiat 500, first remove the door panel. To do this, loosen the screws located under the handle cover and near the window …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos