Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Window Regulator in a Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Window switch

This short video tutorial will explain how to fit new window regulators inside your Fiat 500L. After removing the door panel and taking out the old window regulator, take the new part, unscrew the nuts that will secure it, and insert it behind the door panel. Next, you can screw the previously removed nuts back in and tighten them securely with the appropriate tool. At this point, you can attach the glass to the window regulator with the help of a hook and connect the connector to the electric motor for opening and closing the windows. Test it, and you will see that your window regulator works perfectly!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Roof Bars on a Fiat 500L
How to Install Roof Bars on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Start by assembling the roof bars, adjusting them to the correct measurements for the roof of your Fiat 500L. Next, open the doors of your car and po…
How to disassemble the front door panel of the Fiat 500L
How to disassemble the front door panel of the Fiat 500L
Fiat 500 (2012-2023 / 500 L) Today we will discover the process of disassembling and replacing the front door panel of the Fiat 500L. First, we open the front door and start remo…
How to Remove and Install the Cabin Air Filter on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Learn how to remove and install the cabin air filter on a Fiat 500L. Open the glove compartment and unclip the end-stop arms of the compartment (loca…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos