Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Engine oil

In this video, you will see how to perform an engine oil change in a Fiat 500L. As the first step, work under the vehicle, so lift it with a ramp or a jack and position a large container under the oil sump. Using a spanner, unscrew the oil sump bolt to allow the used oil to drain out, waiting until the process is complete, about 10 minutes. Close the sump with its bolt and open the engine compartment. Fill with new oil suitable for your vehicle, unscrew the yellow cap and pour in the new oil, then turn off the service light.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the oil change light on a Fiat 500L?
How do you reset the oil change light on a Fiat 500L?
Fiat 500 (2012-2023 / 500 L) In this video we see how to reset the oil change light on a Fiat 500L: we turn on the dashboard, and press the accelerator pedal within 10 seconds of…
Replacement of the gear knob of the Fiat 500L
Replacement of the gear knob of the Fiat 500L
Fiat 500 (2012-2023 / 500 L) Below we will see information on how to disassemble and replace the gear knob of the Fiat 500L. First, we get into the car and start by removing the …
How to Reset the Oil Service Light on a Fiat 500L?
How to Reset the Oil Service Light on a Fiat 500L?
Fiat 500 (2012-2023 / 500 L) To reset the Oil Service light on a Fiat 500L, you must first change the oil. After the oil has been replaced, enter the cabin and turn on the igniti…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos