Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the oil change light on a Fiat 500L?

Model: Fiat 500 500 L - Years 2012-2023
Part: Service warning light

In this video we see how to reset the oil change light on a Fiat 500L: we turn on the dashboard, and press the accelerator pedal within 10 seconds of turning it on. We keep it pressed and meanwhile press the brake pedal seven times. On the seventh press of the brake pedal, we hold down both pedals for sixty seconds. Now we release both pedals at the same time and turn off the dashboard. Now we have to wait for another sixty seconds. We turn on the dashboard again and see that the oil change alert has been reset.

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Oil in a Fiat 500L
How to Change the Oil in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, you will see how to perform an engine oil change in a Fiat 500L. As the first step, work under the vehicle, so lift it with a ramp or …
Resetting the Service Light on a Fiat 500L
Resetting the Service Light on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Get in the car and turn the key to switch on the instrument panel, but do not start the engine! Once done, press the accelerator pedal five times wit…
How to Reset the Service Light on the Fiat 500L
How to Reset the Service Light on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) Today, we will show you how to reset the service light for routine maintenance after an oil change on a Fiat 500L, following these simple steps. Firs…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos