Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light of the Fiat 500C

Model: Fiat 500 312 - Years 2007-2024
Part: Tail light

If one of the two rear lights of your Fiat 500C is experiencing operational issues and you want to safely remove it, then all you have to do is follow the steps described in our new guide. First, park the car on a flat surface and turn it off completely for safety reasons. After taking these simple precautions, go to the rear of the vehicle and fully lift the hood. Immediately after, use a 10mm key to unscrew the screws holding the light you want to remove in place. Finally, disconnect the electrical cable and complete the removal of the rear light.

Posted on 15 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat 500c
How to Reset the Service Light on a Fiat 500c
Fiat 500 (2007-2022 / 312) To reset the service light on a Fiat 500c, start by turning on the instrument panel. You will see the message "change engine oil" with the oil warnin…
How to disassemble and repair the soft top of the Fiat 500C
How to disassemble and repair the soft top of the Fiat 500C
Fiat 500 (2007-2024 / 312) Today we will discover the instructions that allow us to disassemble and repair the roof of the Fiat 500C. First, we get into the car and start openi…
How do you replace the convertible top of the Fiat 500C?
How do you replace the convertible top of the Fiat 500C?
Fiat 500 (2007-2024 / 312) To replace the convertible top of the Fiat 500C, you need to access the interior of the cabin and use an object to pry off the inner lining of the to…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos