Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Fiat 500c

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Fiat 500c, start by turning on the instrument panel. You will see the message "change engine oil" with the oil warning light on the instrument panel.

To reset it, while the instrument panel is on, press the accelerator pedal three times in quick succession. After pressing the accelerator pedal, you can turn off the instrument panel.

Wait a few seconds, turn on the instrument panel and then the engine, and you will notice that the message "change engine oil" does not appear and the oil warning light is off. At this point, the service light on the Fiat 500c has been reset.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2021 / 312) Before you can start, sit in the driver’s seat of your Fiat 500C. Begin by turning the key in the ignition switch, activating the instrument panel wi…
Fiat 500 (2007-2024 / 312) Today we will discover the instructions that allow us to disassemble and repair the roof of the Fiat 500C. First, we get into the car and start openi…
Fiat 500 (2007-2024 / 312) Below we will see the instructions that will allow us to repair the convertible top and its mechanism of the Fiat 500C. First of all, let's open our …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the coupon expired warning light on the Fiat 500 mean? Read answer
    • 500 2007-2022 - What does the service light indicate in the FIAT 500? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the engine oil light on the Fiat 500? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos