Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the heating control in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: A/C controls

It is not very common for the heating control lever of a car to break, but for Fiat 500 owners, if it were to happen, they can watch this tutorial and learn to do the work themselves, as described below: Using two small levers, preferably made of plastic, act on both sides of the panel containing the various controls, and detach it, being careful not to break any of the clips on the back. The convenience lies in not having any screws to remove, everything is locked in place, greatly facilitating the work.

Posted on 23 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Cabin Heater Radiator on Fiat 500
Instructions for Removing the Cabin Heater Radiator on Fiat 500
Fiat 500 (2007-2021 / 312) In this video tutorial, you will see the main instructions for removing the cabin heater radiator on a Fiat 500. First, get inside the car and remove…
How to Remove the Car Radio in the Fiat 500?
How to Remove the Car Radio in the Fiat 500?
Fiat 500 (2007-2022 / 312) In this tutorial, see how to replace the car radio in the Fiat 500, a very simple and quick operation. Before proceeding, ensure the key is not inser…
Guide to Removing the Heating Radiator from the Fiat 500 Abarth
Guide to Removing the Heating Radiator from the Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) In this brief guide, you will learn how to remove and replace the heating radiator in the Fiat 500 Abarth. First, get inside the vehicle and start re…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos