Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Cabin Heater Radiator on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Heater core

In this video tutorial, you will see the main instructions for removing the cabin heater radiator on a Fiat 500. First, get inside the car and remove the gear knob by pulling it upwards; then, unscrew the screws underneath with a Torx screwdriver to remove the side plastic panels, as shown in the video. Next, open the two flaps of the heater radiator and pull it out, disconnecting the coolant pipes; simply replace it and reassemble everything by following the reverse procedure!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Heating Radiator from the Fiat 500 Abarth
Guide to Removing the Heating Radiator from the Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) In this brief guide, you will learn how to remove and replace the heating radiator in the Fiat 500 Abarth. First, get inside the vehicle and start re…
Instructions for Removing the Radiator from a Fiat 500
Instructions for Removing the Radiator from a Fiat 500
Fiat 500 (2007-2021 / 312) Let’s see how to remove the radiator from a 1997 Fiat 500, second series, by following these simple and essential instructions. Open the engine bonne…
How to Replace the Coolant in a Fiat 500 Radiator
How to Replace the Coolant in a Fiat 500 Radiator
Fiat 500 (2007-2021 / 312) How to replace the coolant in a Fiat 500? Learn the procedure for replacing the radiator fluid. Lift the front bonnet of the engine, unscrew the cap …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos