Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the radiator in the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Radiator
Operation: How to replace the radiator in the Fiat 500?

In this tutorial we can see how to replace the radiator in the Fiat 500, a simple operation which requires good manual skills. Before proceeding, let's make sure the engine is completely cold and lift the front of the vehicle. We start by unscrewing the bumper fixing bolts located inside the wheel arches, then we open the bonnet and remove the bolts present on the upper edge of the grille. We continue by unscrewing the additional lower screws, separate the bumper from the frame and disconnect the various radiator pipes. At this point, remove the fixing screws from both the latter and the fan, disconnect the various connectors and follow the reverse procedure to mount the replacement.


Posted on 11 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - How much does it cost to replace the radiator in the Fiat 500? Read Answer
    • 500 2007-2021 - Why does the Fiat 500 radiator cap not open? Read Answer
    • 500 2007-2023 - How much does it cost to replace the radiator of the Fiat 500? Read Answer
    • 500 2007-2023 - Where is the fuse of the radiator fan of the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos