Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Heating Radiator from the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2022
Part: Heater core

In this brief guide, you will learn how to remove and replace the heating radiator in the Fiat 500 Abarth. First, get inside the vehicle and start removing the dashboard by taking off the gear knob, glove compartment, and lower plastic covers. Then, remove the central instrument panel by disconnecting the electrical wiring at the back, as shown in the video. Next, open the bonnet to disconnect the radiator pipes, draining the fluid into a container, and remove and replace the heating radiator from inside!

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to removing the seat cable of the Fiat 500 Abarth
Guide to removing the seat cable of the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In this brief guide, we will see the main steps to help you remove and replace the seat folding cable of the Fiat 500 Abarth. First, open the front d…
Where is the OBD port located on the 2017 Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) Being able to independently locate the OBD port inside your 2017 Fiat 500 Abarth can be difficult as the OBD port in question is well hidden inside t…
How to Remove and Replace the Rear Light of the Fiat 500 Abarth
How to Remove and Replace the Rear Light of the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In today's video tutorial, you will learn how to remove and replace the rear light of the Fiat 500 Abarth, following the instructions below. First, o…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos