Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Fiat 500 Abarth radiator replacement

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Radiator
Operation: Fiat 500 Abarth radiator replacement

In this video tutorial we will see the main instructions to be able to disassemble the radiator of a Fiat 500 Abarth. First we lift the car and we go to remove the right front wheel: then we remove the screws of the fender with a screwdriver and we go to disconnect the electrical connectors of the bulbs. At this point we are going to unscrew the screws of the bumper that we find both in the fenders and in the lower part of the car. Now we remove the upper screws, from the engine compartment, and we gently unclip our bumper; then let's unscrew the radiator screws and remove the various sleeves. Follow the video to the end for disassembly!


Posted on 26 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - How much does it cost to replace the radiator in the Fiat 500? Read Answer
    • 500 2007-2021 - Why does the Fiat 500 radiator cap not open? Read Answer
    • 500 2007-2023 - How much does it cost to replace the radiator of the Fiat 500? Read Answer
    • 500 2007-2023 - Where is the fuse of the radiator fan of the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos