|
Do it yourself
| |||
| ||||
Replacement of the rollers on the side door for Fiat Scudo 2 (Jumpy 2, Expert 2)
Model: Fiat Ducato
MK 2
- Years 1993-2016
In this video we can see how to replace the rollers on the side doors of a Fiat Ducato (but also Jumpy and Expert). We start by removing the inner panel of the door, starting with the screws of the handle and then along the panel. We remove the plastic clips with a flat screwdriver; disconnect the electrical cables, remove the rubber seal of the door, in order to expose the mechanism: the rollers are positioned in the lower and upper guide of the door and are fixed with pins or screws, often blocked by plastic stops: we will remove the old rollers with pliers. We can find the new rollers for example on AliExpress with the code 1005007626457885 at the price of 43.99 euros with free delivery; let's install them by inserting them into the tracks, fixing them with their pins and screws and using a little lithium grease to facilitate sliding. Lubricate the guides with silicone spray, reposition the seal and the panel; check the sliding, sometimes the tracks can be deformed. If the rollers often break, it is good to also replace the plastic guides.
Posted on 12 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Ducato
(2006-2014 /
X250)
To adjust the door of the Fiat Ducato, there are several adjustment points where you can intervene. At the upper rear part, there is a pin (bolt) tha…
Fiat Ducato
(2014-2026 /
X290)
To replace the side mirror bulb of a Fiat Ducato, you need to follow a few steps. Start by removing the bulb cover inside the door, which is secured …
Fiat Ducato
(2014-2026 /
X290)
In this video tutorial, you will see how to disassemble and replace the battery of the remote key for the Fiat Ducato x290, as well as for the Fiat P…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.093
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |