Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight of the Fiat Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

In the video guide available to us, we see in detail how to disassemble and replace the front headlight of the Fiat Punto, an intervention necessary for various reasons such as breakage or discoloration. The procedure involves removing the front wheel arch and the entire bumper cover, both of which are bolted on, in order to access the side and rear pins of the headlight assembly.

Once this is done, we remove all the bolts of the headlight and extract it from the body, remembering to disconnect the rear connector of the power cables. Now we can install the new headlight and reassemble everything.


Posted on 20 August 2025 by ScegliAuto


Related tutorials

How to Remove the Front Seat of a Fiat Punto
How to Remove the Front Seat of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the front door of your Fiat Punto. Begin by unscrewing and removing the Torx screws that secure the seat rails to the car. Nex…
How to Remove the Door Panel on a Fiat Grande Punto
How to Remove the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
How to Remove the Front Bumper on a Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today’s video, see how to remove the front bumper on a Fiat Punto Evo and Grande Punto by following these simple steps. First, open and lift the b…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos