Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the 2024 Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part:

If the warning light in question has turned on, it means there is a problem, flat or punctured tires. Let's take action and remedy this, then inflate the aforementioned tires to the value indicated on the adhesive label, present on the driver's door pillar, and finally perform the reset: with the instrument panel on, hold down the appropriate button, located on the left side of the dashboard, wait a few seconds for the central unit to learn the current inflation values and then for the light to turn off. The operation was successful and can be considered complete.

Posted on 2 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To reset the tire pressure warning light on our Fiat Tipo, we start by turning on the car without starting the engine. Then, we need to locate the bu…
How to reset the tire pressure warning light on the Fiat Tipo
How to reset the tire pressure warning light on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) The following steps will show us how to reset the Tire Pressure Monitoring System (TPMS) light on the Fiat Tipo; before performing the reset, it is n…
How to reset the tire pressure sensor of the Fiat Tipo
How to reset the tire pressure sensor of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Through these brief instructions, we will see how to reset the tire pressure monitoring system (TPMS) light on a Fiat Tipo; before performing the res…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos