Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Front Bumper on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Front bumper

See other generations:
Video tutorial

Remove the front bumper on a Fiat Punto: lift the bonnet and secure it, raise the car on a jack, and use a lever (plastic or metal) to remove the retaining rivets located at the top of the bumper. Once the rivets (pins) at the top are removed, take off the side impact absorbers and unscrew the screws located in the wheel arch liners (remove the pins at the bottom of the bumper).

Pull the bumper away from the bodywork by hand; perform the necessary maintenance and refit the new bumper with all the associated parts.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a Fiat Grande Punto
How to Remove the Front Bumper of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the front bumper of a Fiat Grande Punto? Let's look at the removal process. Lift the bonnet and secure it. Using a metal lever, remove …
How to disassemble the front bumper of the Fiat Grande Punto
How to disassemble the front bumper of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will guide us through the process of disassembling and replacing the front bumper of the Fiat Grande Punto. First, we open the h…
Removing the Front Bumper on a Fiat Punto Evo
Removing the Front Bumper on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Remove the front bumper from the Fiat Punto Evo? Here’s how to take off the damaged bumper at the front. Lift the car on a jack to remove the screws …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos