Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace a headlight bulb of a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Light bulb

Let's see how to change a light bulb in the front headlight of a Fiat 500: we open the front hood of the car; for the low beam bulb, we will work on a plastic housing with a round cover, located on the back of the headlight. We rotate the cover counterclockwise, disconnect the electrical connector and release the retaining spring by pressing it downwards. We remove the bulb and install the new one, being careful not to touch the glass of the new halogen bulb with bare hands. We insert it into the housing, close the retaining spring, reconnect the electrical connector, reassemble the plastic cover by rotating it clockwise and close the hood.

Posted on 15 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How do you replace the front headlight bulb of the Fiat 500?
How do you replace the front headlight bulb of the Fiat 500?
Fiat 500 (2007-2024 / 312) To replace the headlight bulb of the Fiat 500, you need to open the hood in order to locate the inner covering panel of the optical group: once this …
How do you replace the headlight bulb of the Fiat 500?
How do you replace the headlight bulb of the Fiat 500?
Fiat 500 (2007-2024 / 312) In order to replace the headlight bulb on the Fiat 500, you need to open the hood so that you can access the components in the engine compartment: th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos