Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Fiat Coupé?

Model: Fiat Coupé Progetto175, MK 1 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Engine oil

Video tutorial

In order to replace the motor oil of the Fiat Coupé, you will need to unscrew the drain plug of the oil pan, which will be located in the central lower part of the vehicle in the engine compartment: by unscrewing this plug, you will be able to drain all the used oil into a container.

In the lower part of the car, there will also be the oil filter that will need to be removed in order to replace it with a new one: once the new filter is inserted, you can proceed with topping up the oil. You will need to open the hood to pour the necessary amount of oil through the corresponding vent.


Posted on 27 October 2025 by ScegliAuto


Related tutorials

Where is the OBD port of the Fiat Coupe located?
Where is the OBD port of the Fiat Coupe located?
Fiat Coupé (1994-2000 / Progetto175, MK 1) If you own a 2000 Fiat Coupe and want to find out where the OBD port is located so you can connect a diagnostic tool to the ECU, then all you have to…
How to Remove and Refit the Bumper
How to Remove and Refit the Bumper
Fiat Coupé (1994-2000 / Progetto175, MK 1) You may need to remove the bumper to carry out a repair or replace it with a modified one to enhance the appearance of your car. As shown in the vide…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos