Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the steering wheel airbag of the Fiat Scudo?

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Airbag

See other generations:
Video tutorial

It is not always necessary to remove and replace an airbag only after it has deployed due to an impact received by the vehicle; there are cases in which a sensor, or other electronic defects, may cause problems, so it is right to remove and check it. Regarding the airbag of the steering wheel of the Fiat Scudo, shown here in the video, the disassembly involves disconnecting the battery that powers the vehicle, then releasing the fasteners by inserting screwdrivers into the holes located at the back of the steering wheel, and finally removing the central cover of the steering wheel, where we see the Fiat emblem, disconnecting the electrical connector of the airbag and extracting it.


Posted on 11 November 2025 by ScegliAuto


Related tutorials

Where are the Fuses on a Fiat Scudo?
Where are the Fuses on a Fiat Scudo?
Fiat Scudo (2007-2016 / MK 2) The fuses on a Fiat Scudo are located inside three fuse boxes installed in the vehicle. These boxes can be found low on the left side of the steering…
How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…
How to Dismantle the Rear Light and Replace the Bulbs on the Fiat Scudo
How to Dismantle the Rear Light and Replace the Bulbs on the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) The following instructions will show you how to dismantle and replace the rear light and its bulbs on the Fiat Scudo. First, open the rear doors and …

Other guides you may be interested in

How to Set the Time on an Audi A6

Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the instrument cluster; then press the settings button and navigate to the time option to confirm your choice, as shown in the video. At this point, set the correct time and format, then exit the settings menu to save the changes made; finally, start the engine and ensure that the time has been set correctly!

Watch the video!


by ScegliAuto

More videos