Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the airbag control unit from the Fiat Ducato to repair it

Model: Fiat Ducato X290 - Years 2014-2026
Part: Control unit

Let's see how to find and remove the ECU from its housing in a Fiat Ducato, which in this case is a camper, but it's not crucial. The battery is located under the driver's feet, so we will have to unscrew the bolts holding the floor of the footwell, and immediately disconnect the battery to avoid any electrical problems. Next to it, we have our ECU, but to get there we have to remove a plastic partition that partially covers it. It is fixed with two bolts to the floor, and then we have to disconnect the electrical connectors. We will have the ECU repaired at an authorized center - let's not try to fix it ourselves if we are not experts in the field - hoping not to receive bad news like the YouTuber who was told that the ECU was irreparable, so he had to buy a new one: there are many opportunities online, even used and refurbished ones, and many types also enhanced, so we will not give purchase recommendations. Reassembly is simple: just reconnect the connectors and secure the safety bolts, reposition the plastic cover, and reconnect the battery. Put back the floor screws, and we're done.

Posted on 17 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Ducato (2006-2014 / X250) Before you start, to work safely, disconnect the battery of your Fiat Ducato. Begin by sitting in the driver's seat. Next, unscrew and remove the scr…
Fiat Ducato (2014-2026 / X290) Before proceeding with the removal of the steering wheel from a 2021 Fiat Ducato vehicle, it is necessary to remove the airbag located inside it. To …
Fiat Ducato (2006-2014 / X250) Below we will see the step-by-step instructions that will allow us to disassemble and replace the steering wheel and its airbag of the Fiat Ducato. F…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos