Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag from a Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Airbag

See other generations:
Video tutorial

Before you start, to work safely, disconnect the battery of your Fiat Ducato. Begin by sitting in the driver's seat.

Next, unscrew and remove the screws that secure the airbag to the steering wheel, located on the back of the steering wheel. Once you have removed the securing screws, you will have freed the airbag.

Proceed to pull it out from the steering wheel. At this point, disconnect the relevant electrical connector.

Once you have completed this step, you will have successfully removed the airbag from your Fiat Ducato.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Removing Airbag and Steering Wheel on Fiat Ducato
Removing Airbag and Steering Wheel on Fiat Ducato
Fiat Ducato (2006-2014 / X250) .. How to remove the airbag from a Fiat Ducato? Here’s how to detach the airbag and the steering wheel f.. …
Disassembly of the steering wheel and its airbag of the Fiat Ducato
Disassembly of the steering wheel and its airbag of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Below we will see the step-by-step instructions that will allow us to disassemble and replace the steering wheel and its airbag of the Fiat Ducato. F…
How to Remove the Steering Wheel of the Fiat Ducato
How to Remove the Steering Wheel of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Today, learn how to remove the steering wheel and the associated airbag module from the previous generation Fiat Ducato. Insert two flathead screwdri…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos