Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Airbag and Steering Wheel on Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Airbag

See other generations:
Video tutorial

How to remove the airbag from a Fiat Ducato? Here’s how to detach the airbag and the steering wheel from the vehicle. Disconnect the battery terminals located in the engine bay. Insert a screwdriver into the back of the steering wheel and unclip the airbag locking tabs.

Once the airbag is detached (driver's side), disconnect the power connectors and remove it from the steering wheel. Unscrew the steering wheel retaining nut and remove the wheel.

Fit the new steering wheel (tighten the nut), reconnect the airbag power connectors, then press the airbag back onto the steering wheel until it locks in place.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to remove the airbag from the 2021 Fiat Ducato
How to remove the airbag from the 2021 Fiat Ducato
Fiat Ducato (2014-2026 / X290) Before proceeding with the removal of the steering wheel from a 2021 Fiat Ducato vehicle, it is necessary to remove the airbag located inside it. To …
How to Remove the Airbag from the Fiat Ducato Van
Fiat Ducato (2006-2014 / X250) Sometimes the airbag warning light on your Fiat Ducato may illuminate, flashing and emitting a bothersome sound. If you have replaced the relevant fu…
How to replace the airbag of the 2021 Fiat Ducato
How to replace the airbag of the 2021 Fiat Ducato
Fiat Ducato (2014-2026 / X290) The steps to replace the driver's side airbag, located inside the steering wheel of the 2022 Fiat Ducato, are simple and quick to perform independent…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos