Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Panel on a Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

How do you remove the tailgate panel of a Fiat Punto Evo? Follow these steps: open and lift the tailgate of your car, and using a screwdriver, unscrew the securing screws located in the plastic panel (where the handles are). Remove the plastic covering on the tailgate of the boot (use a plastic or metal lever for assistance), and disconnect any electrical connectors.

Perform maintenance inside (remove the door opening button or the wiper motor).

Reassemble the plastics and associated parts in reverse order.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Open the Boot of a Fiat Punto Evo in an Emergency
How to Open the Boot of a Fiat Punto Evo in an Emergency
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, in this brief guide, you will learn the steps to open the rear hatch of the Fiat Punto Evo boot in case of an emergency, also applicable to th…
How to Replace the Climate Control Knob of the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this short and simple guide, you will see the steps to remove and replace the climate control knob of the Fiat Punto Evo, as well as the Grande Pu…
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and replace the rear light of the Fiat Punto Evo, as well as the Grande Punto. First, open …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos