Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Driver's Side Airbag in the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Airbag

To remove the airbag from the Fiat Grande Punto, start by removing the horn fuse to prevent any sounds while you proceed with the operation. Locate the fuse in the fuse box situated in the engine compartment. The fuse to disconnect is indicated in the images. At this point, you can begin removing the airbag from the steering wheel. Use a screwdriver to insert into the two slots behind the steering wheel to release the clips that secure the airbag in place. Once this is done, the airbag/horn assembly will come away from its housing. Although not shown in the images, if you wish to replace it, you must disconnect the power supply and proceed to install the new airbag. That’s it!

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today we will look at the instructions on how to disassemble and replace the steering wheel and its airbag on the Fiat Grande Punto and Punto Evo. Fi…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) As we can see in this short tutorial, removing the steering wheel airbag on the Fiat Grande Punto is a very simple and quick operation. Before procee…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How do you remove the airbag from the steering wheel of a Fiat Grande Punto? Follow these steps: before removing the airbag from the steering wheel, …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Fiat Punto Evo 2010 airbag control unit located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos