Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Battery

To replace the battery of the Fiat 500, we need to lift the hood release lever and, once positioned in front of the vehicle, disconnect the negative terminal connector by simply pressing on it. Using a 10mm wrench, loosen the positive terminal nut and remove it; then, with a 13mm socket wrench, unscrew the nut that secures the battery to the vehicle. Remove the old battery and insert the new one, which should be 12 volts and 50 amperes. Connect the positive terminal by tightening the nut with the 10mm wrench, and then connect the negative terminal. Using the 13mm socket wrench, tighten the nut to secure the battery in place. Close the hood, get into the vehicle, and start the car to test the new battery's functionality. After the replacement, it may be necessary to reprogram the car radio.

Posted on 15 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Press the designated unlock button to extract the physical emergency key from the electronic key of your Fiat 500 X. Using the extracted physical key…
How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the remote battery is a simple and quick task for any car remote. The most commonly used battery model is the CR 2032, available online or …
How to replace the battery of the Fiat 500 X remote control
How to replace the battery of the Fiat 500 X remote control
Fiat 500 (2014-2022 / 500 X) When the key of a vehicle stops working, we need to replace the battery. The steps to replace the battery of the Fiat 500 X remote control are: - Ins…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos