Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlight of a Fiat Ducato.

Model: Fiat Ducato X290 - Years 2014-2026
Part: Headlight

To remove the front headlight of a Fiat Ducato, you will need to follow the steps shown in the selected tutorial video. First, open the vehicle's hood and locate the screws that secure the headlight; use a Torx wrench to remove the nuts in question, which you will find both at the top of the headlight and on the side. Next, before proceeding with the extraction of the headlight, make sure to disconnect the electrical connectors attached to the bulbs. Once the connections are removed, you can proceed to take out the headlight by gently pulling it outward.

Posted on 16 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Fiat Ducato
How to Replace the Front Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) To replace the front headlamp bulb on a Fiat Ducato, open the bonnet to access the components inside the engine bay. Specifically, you need to reach …
How to replace the headlight bulb of the Fiat Ducato
How to replace the headlight bulb of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Today's instructions will allow us to disassemble and replace the headlight bulb of the Fiat Ducato. First, let's open the vehicle's hood and start u…
Replacing the Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) How do you replace the headlamp bulb on a Ducato? Lift the bonnet and find the back of the front headlamp. You can remove the front headlamp if space…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos