Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spoiler on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Body

See other generations:
Video tutorial

Let's see how to remove the rear spoiler on a Fiat Grande Punto. Remove the plastic trim with a screwdriver, unscrew the screws located inside (the securing screws of the spoiler).

Once the spoiler is free from any constraints, detach it from the bodywork (peel off and clean any silicone residue). Finally, refit the new spoiler: bond it with appropriate silicone, screw the screws between the spoiler and the tailgate, and refit the plastic trim on the inside of the tailgate.

Check the correct assembly of the parts and ensure perfect balance.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Change the Car Radio on a Fiat Grande Punto?
How to Change the Car Radio on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, learn how to remove the car radio from a Fiat Grande Punto (199). This operation is really simple; you just need to have the radio release key…
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before starting, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrument panel by turning the key in the ignition swit…
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. Firs…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos