Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

Today's instructions will allow us to disassemble and replace the headlight bulb of the Fiat Ducato. First, let's open the vehicle's hood and start unscrewing the fastening screws located at the top of the headlight, so we can detach it and access the interior; then we remove the plastic protective cap of the lights, disconnecting the electrical connector of the bulb and unhooking the metal clip to remove the light, as shown in the video.

At this point, we install the new low beam bulb, having the same fitting!


Posted on 18 January 2026 by ScegliAuto


Related tutorials

Replacing the Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) How do you replace the headlamp bulb on a Ducato? Lift the bonnet and find the back of the front headlamp. You can remove the front headlamp if space…
How to Replace the Front Headlamp Bulb on a Fiat Ducato
How to Replace the Front Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) To replace the front headlamp bulb on a Fiat Ducato, open the bonnet to access the components inside the engine bay. Specifically, you need to reach …
How to Replace the Headlamp Bulb on a Fiat Ducato - Peugeot Boxer
How to Replace the Headlamp Bulb on a Fiat Ducato - Peugeot Boxer
Fiat Ducato (2014-2026 / X290) This video outlines the steps to remove and replace the headlamp bulb on a Fiat Ducato, as well as a Peugeot Boxer. First, open the bonnet and start …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos