Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Toro?

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Service warning light

You can clear the Service light from the instrument cluster of the Fiat Toro by turning the key to activate the instrument cluster: at this point, press and hold the accelerator pedal all the way down, then press and release the brake pedal five consecutive times. After completing this procedure, you can fully release the brake pedal and after a moment, also release the accelerator pedal. Now, turn the key back to the off position and then turn it on again to check that the Service light has been cleared.

Posted on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Toro?
How to Reset the Service Light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light on a Fiat Toro, turn on the instrument cluster by turning the ignition key in the ignition switch. Once the instrument clu…
How do you reset the Service light on the Fiat Toro?
How do you reset the Service light on the Fiat Toro?
Fiat Toro (2016-2024 / MK 1) It will be possible to reset the Service light that is displayed on the instrument panel of the Fiat Toro by inserting the ignition key into the corr…
How do you reset the Service light on a Fiat Toro?
How do you reset the Service light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) It will be possible to reset the Service light that appears on the instrument panel of the Fiat Toro by inserting the ignition key into the correspon…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos