Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt on a Fiat Ducato 2.3 Multijet

Model: Fiat Ducato X250 - Years 2006-2014
Part: Checks and maintenance

The alternator belt, and therefore the auxiliary belt for the air conditioning and water pump, has a specific service interval. It should be replaced at set time intervals or mileage. Additionally, it may need replacing if it becomes noisy or loses elasticity, affecting the air conditioning's effectiveness. To replace it, loosen the tensioner and remove the belt from its position. Inspect the pulleys involved, including the alternator and other mentioned parts, and if everything is fine, install the new belt.

Posted on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…
How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD
How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD
Fiat Ducato (2006-2014 / X250) The presented video helps when you need to replace the timing belt on the Fiat Ducato. Specifically, the work shown does not only demonstrate how to …
Guide to replacing the timing belt of the Fiat Ducato 2.3 Multijet
Guide to replacing the timing belt of the Fiat Ducato 2.3 Multijet
Fiat Ducato (2014-2026 / X290) Today's main instructions will allow us to disassemble and replace the timing belt of the Fiat Ducato 2.3 Multijet. First, we lift the vehicle and st…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos