Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on a Fiat Ducato 2.3 MultiJet

Model: Fiat Ducato - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Timing belt

See other generations:
Video tutorial

In this guide, we will discover the instructions that will allow us to dismantle and replace the timing belt on a Fiat Ducato 2.3 MultiJet. First, raise the vehicle and begin by removing the front right wheel and the wheel arch liner; then disconnect the auxiliary belt and remove the crankshaft pulley, followed by the removal of the timing cover.

At this point, take the necessary references for the replacement of the timing belt, replacing the water pump if necessary; ensure the engine is correctly timed, following the video tutorial to the end!


Posted on 22 October 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Fiat Ducato 2.3 MultiJet
Replacing the Timing Belt on the Fiat Ducato 2.3 MultiJet
Fiat Ducato (2014-2026 / X290) In this guide, we will see the main instructions on how to remove and replace the timing belt on the Fiat Ducato 2.3 MultiJet. First, open the bonnet…
How to Remove and Replace the Timing Belt on a Fiat Ducato 2.3 MultiJet
How to Remove and Replace the Timing Belt on a Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) These brief and simple steps will guide you through the main procedures for removing and replacing the timing belt on a Fiat Ducato 2.3 MultiJet. Fir…
Guide to Replacing the Timing Belt and Water Pump on the Fiat Ducato 2.3 MultiJet
Guide to Replacing the Timing Belt and Water Pump on the Fiat Ducato 2.3 MultiJet
Fiat Ducato (2014-2026 / X290) In this guide, we will see the main instructions on how to disassemble and replace the timing belt and water pump on the Fiat Ducato 2.3 MultiJet. Fi…

Other guides you may be interested in

How to Open the Bonnet of the Renault Kangoo

In this video, see how to open the bonnet of a Renault Kangoo and locate the windscreen washer fluid reservoir. The YouTuber had to go to a local garage to achieve this. He mentions going towards the passenger door, as this is a right-hand drive vehicle. Naturally, for left-hand drive vehicles, the door is that of the driver. Pull the lever located on the side towards you to release the bonnet. To open it, lever from the centre of the bonnet outwards, which is somewhat the opposite of how most bonnets open. In front of the driver, on the grille, there is a black rubber cap. Here you can add the washer fluid.

Watch the video!


by ScegliAuto

More videos