Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Timing Belt on a Fiat Ducato 2.3 MultiJet

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

These brief and simple steps will guide you through the main procedures for removing and replacing the timing belt on a Fiat Ducato 2.3 MultiJet. First, raise the vehicle and begin by removing the front right wheel and the wheel arch liner; then disconnect the serpentine belt by loosening the tensioner, followed by removing the crankshaft pulley, as shown in the video.

At this point, take the necessary references for replacing the timing belt, installing the new original one; if necessary, also replace the water pump kit.


Posted on 6 March 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a 2005 Fiat Ducato MultiJet 2.3
How to Replace the Timing Belt on a 2005 Fiat Ducato MultiJet 2.3
Fiat Ducato (1993-2016 / MK 2) To replace the timing belt on a 2005 Fiat Ducato MultiJet 2.3, open the front bonnet. Using a combination spanner, loosen the tensioner pulley and re…
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…
Replacement of the timing belt of the Fiat Ducato 2.3 Multijet
Replacement of the timing belt of the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) Today's step-by-step instructions will allow us to disassemble and replace the timing belt and water pump kit of the Fiat Ducato 2.3 Multijet. First,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos