Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fog Light on a Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Fog lights

Learn how to remove the fog light along with the bulb on a Fiat Punto Evo. Start by removing the side fog light located on the bumper: unscrew the securing screw of the light's plastic cover (grid-like plastic) with the appropriate screwdriver, then use a lever to detach it from the bumper. Once the plastic is removed, unscrew the screws of the fog light and extract it from the car's bumper (disconnect the power cable). Fit the new part with the new bulb (same size and voltage). Test the correct operation after installation.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fog Light on a Fiat Punto Evo
How to Remove the Fog Light on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This video shows how to remove the fog light with bulb on a Fiat Punto Evo. Prepare to remove the side fog light located on the bumper: unscrew the f…
Check Fog Light Preparation on Fiat Punto Evo
Check Fog Light Preparation on Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To check if your Fiat Punto Evo is already prepared for fog light installation, start by inspecting the engine bay for connectors corresponding to th…
Replace the Fog Light Bulb on a Fiat Grande Punto
Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's tutorial, we will go through the steps to remove and replace the fog light bulb on a Fiat Grande Punto, as well as on the Punto Evo. To ac…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos