Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light on a Fiat Punto Evo?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fog lights

See other generations:
Video tutorial

To replace the fog light on a Fiat Punto, loosen the screw located at the top of the cover surrounding the light. By unscrewing this bolt, you can remove the cover and subsequently loosen the screws that secure the light in its housing.

Pulling out the light, you can disconnect the connector attached to its rear and replace it with a new spare part. The new light should be positioned in its housing, secured with the relevant screws, and protected with the plastic cover that surrounds it.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, learn how to remove the fog light with bulb from a Fiat Grande Punto Evo. Start by removing the plastic grille frame around the side f…
How to Remove the Fog Light on a Fiat Punto Evo
How to Remove the Fog Light on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Learn how to remove the fog light along with the bulb on a Fiat Punto Evo. Start by removing the side fog light located on the bumper: unscrew the se…
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. Firs…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos