Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Identify the Steering Column ECU Code on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Warning light – error code

Learn how to remove the covering plastics of the steering column to identify the ECU code on a Fiat Punto. Take an Allen key, unscrew the securing screws on the covering plastics of the column. Remove all the securing screws inside the covering plastics; detach the plastic (as shown in the video) and locate the code on the electrical cables (label as shown in the video). Note down the code on the label and after ordering it: fit the new steering column ECU following the disassembly of the plastics.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Power Steering Motor on the Fiat Punto 188
How to Replace the Power Steering Motor on the Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) The failure of the electric power steering, commonly known as city steering, on the Fiat Punto 188 is a well-known issue, but it is easy to find spar…
Electric Power Steering Motor Repair
Electric Power Steering Motor Repair
Fiat Punto (1999-2011 / MK 2, 188) One of the most common faults with the electric power steering on the Fiat Punto 188 first series (power steering control unit code 6971) involves th…
Removing the Power Steering Motor of Fiat Punto
Removing the Power Steering Motor of Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will see instructions on how to remove the power steering motor of a Fiat Punto second series. First, access the inside o…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What does the ESP and Hill Holder light on the Grande Punto mean? Read answer
    • Punto 2005-2018 - How to reset the car radio in the Fiat Punto? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos