|
Do it yourself
| |||
| ||||
Electric Power Steering Motor Repair
Model: Fiat Punto
MK 2, 188
- Years 1999-2011
One of the most common faults with the electric power steering on the Fiat Punto 188 first series (power steering control unit code 6971) involves the drive motor, particularly the failure of the relays in the electronic circuit. The repair is relatively simple, but you need to be skilled in soldering and have the appropriate tools, especially a desoldering tool. To remove the motor, you do not need to take out the entire steering column; just remove the diagnostic port cover, the lower casing of the indicator stalk, and the metal shield. Then, unscrew the three mounting bolts of the motor and disconnect the plugs from the control unit. Once on the workbench, extract the electronic circuit by desoldering the winding wires, remove the old relays, and install the new ones, ensuring the pins do not touch the rotating magnetic disc; reassemble everything and install it back in the vehicle.
Updated on 10 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(1999-2011 /
MK 2, 188)
If the steering wheel of the Fiat Punto is stuck, there may be issues related to the power steering. A temporary solution to resolve the problem coul…
Fiat Punto
(1999-2011 /
MK 2, 188)
In this video tutorial, you will see instructions on how to remove the power steering motor of a Fiat Punto second series. First, access the inside o…
Fiat Punto
(1999-2011 /
MK 2, 188)
The failure of the electric power steering, commonly known as city steering, on the Fiat Punto 188 is a well-known issue, but it is easy to find spar…
Other guides you may be interested in
|
Frequently Asked QuestionsWhere is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.836
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |