|
Do it yourself
| |||
| ||||
How to Remove the Ignition Switch from the Fiat Punto
Model: Fiat Punto
MK 1, 176
- Years 1993-1999
In this video tutorial, you can see how to remove the ignition switch from the first series Fiat Punto. First, take a hex key and start removing the plastic covers located under the steering wheel, beginning with the screws at the bottom; this will allow you to remove the panel under the steering wheel. Now, unscrew two more screws that hold the plastic in place; once these screws are removed, you need to unscrew the screws from the steering column; then, using a screwdriver (be careful not to damage anything), remove the horn cover and disconnect the horn wires (positive and negative). Using a 24 mm socket, unscrew the steering bolt (to better unscrew the central bolt, turn the steering wheel all the way). Now, straighten the steering wheel and remove the screw. Remove the steering wheel and then proceed to remove the indicator stalk. At this point, disconnect the connector and remove the ignition switch.
Updated on 21 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(1993-1999 /
MK 1, 176)
How to remove the ignition switch on a Fiat Punto? Before removing the ignition switch from the car, disconnect the battery power cables. Use a socke…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
How do you remove the ignition switch from a Fiat Punto? Follow these steps. Before removing the ignition switch, disconnect the battery terminals. U…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Today, you will learn how to briefly remove an ignition barrel on a Fiat Grande Punto. First, clear the space to work on it by removing the plastics …
Other guides you may be interested in
|
Where is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.396
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
