Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

How do you remove the door panel of a Fiat Grande Punto? Don't worry, here's how to proceed. Using a screwdriver, unscrew the screws located in the area of the upper door opening lever (after removing the plastic screw covers) and the screws present in the handle.

Remove the plastic covering above the handle, unscrew the remaining screws on the door panel, and detach the retaining clips. Remove the panel and disconnect it from the door (unplug the power wiring and the opening cable).

Replace the door panel and reassemble everything in reverse order.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Fiat Grande Punto
How to Remove the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
Removing the Rear Door Panel from a Fiat Grande Punto
Removing the Rear Door Panel from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to remove the rear door panel from a Fiat Grande Punto. First, open the door and then remove the window ha…
How to remove the front door panel of the Fiat Grande Punto
How to remove the front door panel of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will show you how to remove and replace the front door panel of the Fiat Grande Punto, as well as the Punto Evo. First, open the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos