Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glass of the External Rear-View Mirror on a Fiat Qubo

Model: Fiat Qubo MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

Video tutorial

Today's instructions will show you the procedure for removing and replacing the glass of the external rear-view mirror on a Fiat Qubo. First, move to the outside and start prying the mirror glass, being careful not to break it, then detach it from the clips at the back; replace the glass with the new one, ensuring all clips are in perfect condition for the correct installation of the mirror glass, as shown in the video.

At this point, adjust the angle of the glass using the control inside.


Posted on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Glass of the Fiat Qubo?
How to Replace the Front Glass of the Fiat Qubo?
Fiat Qubo (2008-2019 / MK 1) To replace the front glass of the Fiat Qubo, first remove the screws located near the window switch panel and take the panel out of its housing. Next…
How to Service the Rear Brakes on a Fiat Qubo
How to Service the Rear Brakes on a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In today's video, see how to maintain the rear brakes on a Fiat Qubo. First, lift the van using a ramp or, if unavailable, a jack or similar. Next, r…
Removing Seats from a Fiat Qubo
Removing Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In this short guide video, you will learn how to remove the rear seats from a Fiat Qubo; primarily, we will cover the essential steps. First, open th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos