Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Rear Brakes on a Fiat Qubo

Model: Fiat Qubo MK 1 - Years 2008-2019
Part: Brake pads

In today's video, see how to maintain the rear brakes on a Fiat Qubo. First, lift the van using a ramp or, if unavailable, a jack or similar. Next, remove the wheel using the appropriate removal tool. Once the wheel is off, you will see the rear brake. At this point, proceed to dismantle and adjust the rear shoes or replace them if absolutely necessary. After this, finish the job by reassembling everything.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Seats from a Fiat Qubo
Removing Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In this short guide video, you will learn how to remove the rear seats from a Fiat Qubo; primarily, we will cover the essential steps. First, open th…
How to Remove the Rear Seats from a Fiat Qubo
How to Remove the Rear Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) Before you can start, open the rear doors and the boot of your Fiat Qubo. Begin by removing the parcel shelf by simply unhooking it. Next, pull the u…
How to Fold Down the Rear Seats on a Fiat Qubo
How to Fold Down the Rear Seats on a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) Learn how to fold down the rear seats on a Fiat Qubo. In this video, see how to lower and remove the rear seats to create more space in the cabin. Fi…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos