Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter in the Fiat 124 Spider

Model: Fiat 124 MK 2 - Years 2016-2019
Part: Cabin air filter

To change the air filter in your Fiat 124 Spider, follow these simple steps. First, open the bonnet and locate the air filter assembly. Next, disconnect the air intake hose by removing the support screw as shown in the video. Then, disconnect the connectors on the left side of the filter by carefully removing the clips that secure them to avoid breaking them. After that, remove the steel clips, one at the top and one at the bottom. You can then take off the plastic cover and the old filter. Once done, replace the filter and reassemble the parts by following the same instructions in reverse, and you're all set!

Posted on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a Fiat 124 Spider
How to Reset the Maintenance Light on a Fiat 124 Spider
Fiat 124 (2016-2019 / MK 2) To complete the manual reset procedure for the maintenance light on your Fiat 124 Spider, simply follow the steps described below. First, get into th…
Where is the OBD2 port located in the Fiat 124 Spider?
Where is the OBD2 port located in the Fiat 124 Spider?
Fiat 124 (2016-2019 / MK 2) If you own a Fiat 124 Spider Mk2 and want to find out where the OBD2 port is located, you just need to read the following guide and follow the descri…
How to Reset the Service on a Fiat 124 Spider?
How to Reset the Service on a Fiat 124 Spider?
Fiat 124 (2016-2019 / MK 2) In this tutorial, we will see how to reset the service on a Fiat 124 Spider, a very simple and quick operation. Before proceeding, ensure you have co…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos