Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Fiat 500X cabin filter replacement

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Cabin air filter
Operation: Fiat 500X cabin filter replacement

Open the front right door and remove the side cap adjacent to the door by gently pulling it outwards; now you can open the glovebox and unscrew the three torx screws positioned in the upper edge and the three in the lower one as shown in the video. At this point you can remove the drawer by pulling it outwards; you will notice an iron bracket placed in front of the filter box; unscrew and remove it to access the filter box cap. Remove the cap, take out the old filter and replace it with the new one; to close and restore everything, follow the previous instructions in reverse.


Posted on 17 November 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • 500 2012-2023 - Where is the cabin air filter located in the 2014 Fiat 500L? Read Answer
    • 500 2012-2021 - Where is the pollen filter located in the Fiat 500 L? Read Answer
    • 500 2014-2022 - Where is the cabin filter located in the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the cabin air filter located on the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the Fiat 500x cabin air filter located? Read Answer
    • 500 2014-2022 - Where is the pollen filter on the Fiat 500X located? Read Answer
    • 500 2012-2023 - Where is the pollen filter of the Fiat 500L located? Read Answer
    • 500 2014-2022 - Where is the pollen filter on the Fiat 500x located? Read Answer
    • 500 2014-2022 - Where is Fiat 500 x cabin air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos