Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Headlight

How do you remove the front headlamp of a Fiat Ducato to replace the bulbs? Follow these steps for disassembly. Open the bonnet (pull the release lever) and secure it. Unscrew the retaining bolts at the top and bottom of the headlamp using a socket spanner (battery-powered screwdriver), detach the headlamp from its housing, and disconnect the power connector for the lights. Fit the new headlamp with new bulbs if damaged (ensure they are the correct type and size) and insert it back into its housing. Finally, tighten the bolts on the plastic bumper. Test the lights for correct operation.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) How do you replace the headlamp bulb on a Ducato? Lift the bonnet and find the back of the front headlamp. You can remove the front headlamp if space…
How to Remove the Front Headlamp of a Fiat Ducato
How to Remove the Front Headlamp of a Fiat Ducato
Fiat Ducato (2014-2026 / X290) .. How to remove the front headlamp of a Fiat Ducato? Follow these steps for disassembly. Open the bonnet.. …
How to replace the headlight bulb of the Fiat Ducato
How to replace the headlight bulb of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Today's instructions will allow us to disassemble and replace the headlight bulb of the Fiat Ducato. First, let's open the vehicle's hood and start u…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos