Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Wheel from a Fiat Talento

Model: Fiat Talento MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Wheel

This video is currently unavailable

In this guide, learn how to remove a wheel from a Fiat Talento. Open the cabin and take the removal kit (located under the driver's seat) which includes: jack, jack handle, screwdriver, wheel nut key (if present), telescopic wrench, spare wheel.

Position the jack under the vehicle's jacking point (under the sturdiest part of the chassis), lift the vehicle slightly and loosen the wheel nuts. Raise the vehicle with the jack handle, unscrew the nuts, and pull the wheel off the hub. Fit the spare wheel onto the hub with the respective nuts and lower the vehicle to the ground.

Always remember to store the removal kit with all its parts in the designated compartment.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box Located on the 2019 Fiat Talento?
Where is the Fuse Box Located on the 2019 Fiat Talento?
Fiat Talento (2016-2021 / MK 1) To locate the position of the fuse box in your 2019 Fiat Talento takes just a few seconds. Below, you will find all the instructions you need. First,…
Where is the OBD port located on the Fiat Talento?
Where is the OBD port located on the Fiat Talento?
Fiat Talento (2016-2021 / MK 1) If you own a Fiat Talento and don't know where the OBD port is located, through which you can connect a diagnostic tool to the vehicle, then all you …
How to reset the service light on the Fiat Talento
How to reset the service light on the Fiat Talento
Fiat Talento (2016-2021 / MK 1) In today's video, we will see how to make the expired maintenance interval warning message disappear from the onboard computer of the Fiat Talento. T…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos