Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the Fiat Talento?

Model: Fiat Talento MK 1 - Years 2016-2021
Part: Checks and maintenance

If you own a Fiat Talento and don't know where the OBD port is located, through which you can connect a diagnostic tool to the vehicle, then all you have to do is read the following guide carefully and follow the steps. First of all, open the driver's side door and then turn off the instrument panel if you haven't already done so, and look to the left side of the dashboard. At this point, open the small compartment and then remove the entire plastic piece with your hands. Finally, locate the fuses of your Fiat Talento.

Posted on 17 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box Located on the 2019 Fiat Talento?
Where is the Fuse Box Located on the 2019 Fiat Talento?
Fiat Talento (2016-2021 / MK 1) To locate the position of the fuse box in your 2019 Fiat Talento takes just a few seconds. Below, you will find all the instructions you need. First,…
How to reset the service light on the Fiat Talento
How to reset the service light on the Fiat Talento
Fiat Talento (2016-2021 / MK 1) In today's video, we will see how to make the expired maintenance interval warning message disappear from the onboard computer of the Fiat Talento. T…
Where are the fuses located in the Fiat Talento?
Where are the fuses located in the Fiat Talento?
Fiat Talento (2016-2021 / MK 1) All the fuses of the Fiat Talento have the function of regulating the operation of one or more devices that are installed on board the vehicle: in th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos