Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console on a Fiat Tipo

Model: Fiat Tipo - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Center console tunnel

See other generations:
Video tutorial

In this brief guide, you will find instructions to remove and replace the centre console of the Fiat Tipo. First, get into the vehicle and start by removing the side plastic covers of the centre console; unscrew the screws found underneath and on the cup holder, removing the cover located at the base of the gear lever, as shown in the video.

At this point, disconnect and remove the entire plastic of the centre console, making any necessary repairs or replacements; then reassemble the centre console and finally all its components.


Posted on 8 November 2026 by ScegliAuto


Related tutorials

Guide to Removing the Dashboard of the Fiat Tipo
Guide to Removing the Dashboard of the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Here are the main steps to remove and replace the dashboard, which is necessary for removing the heating radiator of the Fiat Tipo. First, get inside…
How to Install the Blocksystem on the Fiat Tipo
How to Install the Blocksystem on the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) In today's video, you will see how to install the Blocksystem anti-theft system on the Fiat Tipo, following the instructions below. First, get inside…
How to remove the headrests of the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Today we will see the instructions that will allow us to disassemble the front and rear headrests of the Fiat Tipo, in simple and quick steps. First …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos