Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Blocksystem on the Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Light bulb

See other generations:
Video tutorial

In today's video, you will see how to install the Blocksystem anti-theft system on the Fiat Tipo, following the instructions below. First, get inside the vehicle and start by removing the steering wheel airbag, disconnecting the electrical connector at the back; then, undo the central screw of the steering wheel to remove it. At this point, remove the steering angle sensor and its column, so you can install the Blocksystem; its operation is illustrated below, so follow the video to the end to fully understand the steps!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Dismantle and Replace the UConnect Display on Fiat Tipo 356
How to Dismantle and Replace the UConnect Display on Fiat Tipo 356
Fiat Tipo (2016-2026 / 358, 356, 357) In this guide, discover how to dismantle and replace the Uconnect multimedia system with the Android radio on the Fiat Tipo 356, in simple steps. Fir…
How to Remove the Outer Door Handle of the Front Door of the Fiat Tipo
How to Remove the Outer Door Handle of the Front Door of the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Below are the main instructions that will allow you to remove and replace the outer door handle of the front door of the Fiat Tipo. First, open the f…
How to Install the Armrest in the Fiat Tipo?
How to Install the Armrest in the Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) Follow these steps to install an armrest in the Fiat Tipo. First, ensure that the purchased armrest is compatible. Begin by removing the plastics aro…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos