Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag on a 2015 Fiat Tipo?

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Airbag

See other generations:
Video tutorial

Caution: It is recommended not to perform this procedure unless you are sure of what you are doing to avoid compromising driver safety. Before starting, disconnect the battery by removing the negative terminal.

Obtain a suitable tool and insert it into the hole at the back of the steering wheel, as explained in the video, to release the clip. Use your hand to pull the airbag from its housing and repeat the process on the other side.

Once the airbag is removed, disconnect the two electrical connectors at the back to completely free the airbag.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Activate or Deactivate the Passenger Airbag on a Fiat Tipo
How to Activate or Deactivate the Passenger Airbag on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) In this brief video tutorial, see the steps necessary to turn on or off the passenger airbag on a Fiat Tipo. First, switch on the ignition and enter …
How to Install the Blocksystem on the Fiat Tipo
How to Install the Blocksystem on the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) In today's video, you will see how to install the Blocksystem anti-theft system on the Fiat Tipo, following the instructions below. First, get inside…
How to Dismantle the Key of the Fiat Tipo?
How to Dismantle the Key of the Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To dismantle the key of the Fiat Tipo, press the button at the top of the device to leverage inside its housing: this will detach the plastic cover a…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos